Manual:Usando espazos de nomes personalizados

This page is a translated version of the page Manual:Using custom namespaces and the translation is 1% complete.

Alén do incorporado namespaces, é posíbel engadir espazos de nomes personalizados a unha instalación MediaWiki, para posteriormente separar contido e deixar unha organización máis lóxica.

Custom namespaces are simple to manage using the $wgExtraNamespaces configuration directive. It is also possible to define alias names for custom (and also predefined) namespaces, using the $wgNamespaceAliases configuration directive. Some extensions make it easy for you to create custom namespaces. Examples include NamespaceManager and BlueSpiceNamespaceManager .

It is recommended to ensure there are no pending jobs in the job queue before manipulating namespaces, to avoid such jobs from failing if they target pages from namespaces you are about to delete or rename. Use runJobs.php to run all pending jobs and clear the queue before manipulating namespace configuration.

Creating a custom namespace

You register additional namespaces by adding them to the $wgExtraNamespaces global variable to your "LocalSettings.php" file. All namespaces require a unique numerical index in this array. As an example of simple custom namespace creation, adding the following lines to the "LocalSettings.php" file defines a "Foo" namespace 3000 and its associated "Foo_talk" namespace. Note that having a talk namespace associated with your custom namespace is currently a hard requirement.

// Define constants for my additional namespaces.
define("NS_FOO", 3000); // This MUST be even.
define("NS_FOO_TALK", 3001); // This MUST be the following odd integer.

// Add namespaces.
$wgExtraNamespaces[NS_FOO] = "Foo";
$wgExtraNamespaces[NS_FOO_TALK] = "Foo_talk"; // Note underscores in the namespace name.

Pick an unused number: As a convention, the namespaces numbered 100-199 are reserved for site-specific namespaces, although there are some extensions that don't follow this convention. Extension writers use higher numbers, up to 32767. When choosing your index, you should avoid any number already in extension default namespaces , since you might want to install that extension later. Numbers from 3000 to 4999 are reserved for system administrators to define their custom namespaces. (Also, you’ll want to avoid any namespace name that’s already in Extension default namespaces.)

Even then odd

Note the namespace array index is 3000 in the above example.

an even namespace index denotes a subject namespace.
the odd index immediately following that number denotes its associated discussion ("talk") namespace

Create the talk namespace too: You typically create a discussion "Talk" namespace along with each custom namespace. With this example, if you move a page into the "Foo" namespace, you will be prompted to move its associated talk page, if any, and if you choose to do so, MediaWiki will place the talk page in "Foo talk".

No spaces: Use underscores instead of spaces when registering namespace names. "My Namespace" is invalid here; use "My_Namespace" instead.

No hyphens

The uppercase part does not permit hyphens but they can still be safely added to the prefix title. Example:

$wgExtraNamespaces[NS_FOOFOO] = "Foo-Foo";

Name the numbers you pick: The example defines constants for the namespace IDs, so that you can refer to these namespaces later on in the configuration, for example in $wgNamespaceProtection , $wgNamespacesWithSubpages , or $wgExtraGenderNamespaces .

You could go on to configure additional settings for your new namespace.

$wgNamespaceProtection[NS_FOO] = [ 'editfoo' ]; // permission "editfoo" required to edit the foo namespace
$wgNamespacesWithSubpages[NS_FOO] = true;            // subpages enabled for the foo namespace
$wgGroupPermissions['sysop']['editfoo'] = true;      // permission "editfoo" granted to users in the "sysop" group

Do it early: Manipulation of $wgExtraNamespaces must be completed during MediaWiki initialization, i.e. in case an extension etc. should work with the newly created custom namespace, make sure that you define and name them prior to invoking the respective extension. For instance it cannot be manipulated in a post-initialization hook like $wgExtensionFunctions .

Watch out for collisions with URL protocols: MediaWiki's linking code knows about a number of URL protocols, defined in the $wgUrlProtocols variable. If your namespace name is identical to one of these protocols, you're going to have trouble creating [[wikilinks]] to pages in your custom namespace. This most commonly arises when someone tries to create a "News" namespace, because news: is a URL protocol for NNTP newsgroups.; To avoid this issue, you can deregister the relevant URL protocol by adding the following code to the "LocalSettings.php" file (replacing news by the lowercased name of the protocol you wish to remove):

$wgUrlProtocols = array_diff( $wgUrlProtocols, array( 'news:' ) );

In extensions

MediaWiki version:

≥ 1.25

Gerrit change 166705

Extensions often add their own namespaces, such as the Flow extension's "Topic" namespace. The extension.json registration system has a namespaces key for an extension to list its namespaces. From the Gadgets extension:

"namespaces": [
		{
			"id": 2300,
			"constant": "NS_GADGET",
			"name": "Gadget",
			"protection": "gadgets-edit"
		},
		{
			"id": 2301,
			"constant": "NS_GADGET_TALK",
			"name": "Gadget_talk"
		},
]

You can also set other namespace-related settings here, such as whether it should be a content namespace or not; see Manual:Extension.json/Schema#namespaces for the available properties.

If namespace registration is conditional (for example EventLogging only defines its "Schema" namespace on the wiki where it stores schemas), the extension should add "conditional": true to the namespace definition in extension.json, and also register a handler for the CanonicalNamespaces hook there which decides whether to register the namespace or not. The hook handler should only change the $namespaces with which it is called; all other settings of the namespace should still be registered in the extension.json. If those settings should also be dynamic, do not change $wgContentNamespaces , $wgNamespaceContentModels etc. in the CanonicalNamespaces hook handler (it will have no effect – T288819); instead, you will have to set them earlier, such as in a callback (not in $wgExtensionFunctions ).

Note that adding an extension to LocalSettings.php does not necessarily make relevant namespace constants available as globals for other extensions.

Content namespaces

When building the site statistics page (see Special:Statistics), MediaWiki uses values stored in the database to calculate certain totals. One particular total is the "number of articles" or "number of content pages" figure.

For a page to be considered an article, or proper content, it must:

Be in the main namespace, or a defined content namespace

Not be a redirect page

Contain at least one internal link, as configured by $wgArticleCountMethod .

When creating custom namespaces to hold additional content, it is a good idea to indicate this in the configuration. This is done via the $wgContentNamespaces configuration directive.

To extend the example above, one might add the following to the "LocalSettings.php" file:

$wgContentNamespaces[] = 3000;

or

$wgContentNamespaces[] = NS_FOO;

MediaWiki will now consider pages in the "Foo" namespace to be articles, if they meet the remaining criteria, and will include them when updating the site statistics counters.

Running maintenance scripts

When adjusting the value of configuration parameter $wgContentNamespaces, it is a good idea to run either the "path/to/maintenance/updateArticleCount.php or "path/to/maintenance/initSiteStats.php" script to update the internal statistics cache (see Manual:Maintenance scripts ).

Why you would want a custom namespace

There are several reasons you might want this:

A custom namespace can be used to hold content that should not be shown on the search results page, for example pages that are used only for transclusion.

Certain namespaces require additional privilege(s) for editing.

You want certain namespaces not to be subjected to certain limitations or default settings ($wgNoFollowNsExceptions for example)

A uniform prefix for specific content(s), which is searchable for that namespace only

If you're a MW developer, sometimes you need to have a custom namespace for your extension(s)

Dealing with existing pages

When storing page records, MediaWiki uses a namespace's numerical index, along with the remaining title text. Thus, when a page is created in a namespace that doesn't exist, e.g. "Bar:Some page", it is treated as being in the main namespace.

This can cause problems if adding a custom namespace definition for "Bar" at a later date, as MediaWiki will look for a page indexed via the proper namespace, but won't be able to find it, thus making the content inaccessible.

To correct this problem, there are three main approaches.

Move conflicting pages

If the number of pages affected is small (e.g. "Bar" held five pages created before the namespace was defined in the site configuration), then the following approach might be suitable:

Comment out the namespace definition in the configuration file

Access each affected page, and move it out of the pseudo-namespace, e.g. move "Bar:Some page" to "Bar2:Some page"

Un-comment the namespace definition

Move the affected pages back into the new namespace

Use a maintenance script

Within the maintenance directory, there is a maintenance script which performs the above operation more effectively for a large number of pages: NamespaceDupes.php It is simple to use, but as with all MediaWiki maintenance scripts, consult the available usage information first (use --help as an option).

Use a database query

To move all pages "Bar:Some page" into namespace 3000, make the following database query:

UPDATE page SET
page_title = REPLACE(page_title, 'Bar:', ''),
page_namespace = 3000
WHERE page_title LIKE 'Bar:%' AND page_namespace=0

To handle discussion pages:

UPDATE page SET
page_title = REPLACE(page_title, 'Bar_talk:', ''),
page_namespace = 3001
WHERE page_title LIKE 'Bar_talk:%' AND page_namespace=1

After such fiddling, run the refreshLinks.php script and the updateSearchIndex.php script to update internal links and search results in your wiki. Note that external search engines like Google will take some time to update their index.

Removing custom namespaces

The problem addressed above also occurs when a custom namespace definition is removed; MediaWiki is no longer aware of the numerical index for the namespace, and attempts to search the main namespace for the desired pages, leading to inaccessible content. This is a rare occurrence, since most sites will not need namespaces removed, but it is a problem. (See mailing list discussion).

Example on how to remove Flow and the Topic namespace:

Uninstall Flow

Temporarily add $wgExtraNamespaces[2600] = 'Topic'; to the config

Use deleteBatch.php to delete all pages in the Topic namespace

Remove the $wgExtraNamespaces config

Renaming custom namespaces

Suppose that you need to rename custom namespace "Foo" to "New" without performing a mass move of pages. The easiest way to achieve this is to preserve the namespace ID (here "3000") as well as the namespace constant (here "NS_FOO"), modify the (visible) namespace title and add the old one as an alias.

change

define("NS_FOO", 3000);
$wgExtraNamespaces[NS_FOO] = "Foo";

to

define("NS_FOO", 3000);
$wgExtraNamespaces[NS_FOO] = "New";
$wgNamespaceAliases['Foo'] = NS_FOO;

Avoid namespace conflicts

In order for you to avoid namespace conflicts e.g. your namespace has the same number as a namespace defined by an extension, the extension namespace list shows you which numbers to avoid to prevent conflicts.

Defining $wgNamespacesToBeSearchedDefault , $wgNamespacesWithSubpages , $wgContentNamespaces or $wgNamespaceAliases for an ID not associated to any existing namespace in $wgExtraNamespaces doesn't break the wiki; MediaWiki gracefully ignores such configurations.

Styling namespaces

For example, to set the background color of pages in a particular namespace (and its associated talk namespace) you can add the following code to your common.css:

.ns-3000 #content, .ns-3001 #content { background-color: #f3f3ff; }
.ns-3000 div.thumb, .ns-3001 div.thumb { border-color: #f3f3ff; }

where 3000 is the namespace's index and #f3f3ff is the color you want as its background color.

You might also want to change the name of the tab from its default (the namespace's name). This is located in your system messages at MediaWiki:nstab-namespace.