Handbuch:Pywikibot/noreferences.py

This page is a translated version of the page Manual:Pywikibot/noreferences.py and the translation is 20% complete.

Wikimedia Git repository has this file: scripts/noreferences.py

noreferences.py is a Pywikibot script used to add a missing references section to pages.

It goes over multiple pages, searches for pages where ‎<references /> is missing although a ‎<ref> tag is present, and in that case adds a new references section.

Syntax

Die Syntax ist:

$ python pwb.py noreferences [page generator] [-option]

These command line parameters can be used to specify which pages to work on:

Generators and filters available

Generatoroptionen
Parameter	Beschreibung
`-cat`	Work on all pages which are in a specific category. Argument can also be given as "-cat:categoryname" or as "-cat:categoryname\|fromtitle" (using # instead of \| is also allowed in this one and the following)
`-catr`	Like -cat, but also recursively includes pages in subcategories, sub-subcategories etc. of the given category. Argument can also be given as "-catr:categoryname" or as "-catr:categoryname\|fromtitle".
`-subcats`	Work on all subcategories of a specific category. Argument can also be given as "-subcats:categoryname" or as "-subcats:categoryname\|fromtitle".
`-subcatsr`	Like -subcats, but also includes sub-subcategories etc. of the given category. Argument can also be given as "-subcatsr:categoryname" or as "-subcatsr:categoryname\|fromtitle".
`-uncat`	Work on all pages which are not categorised.
`-uncatcat`	Work on all categories which are not categorised.
`-uncatfiles`	Work on all files which are not categorised.
`-file`	Read a list of pages to treat from the named text file. Page titles in the file may be either enclosed with brackets (example: `[[Page]]`), or be separated by new lines. Argument can also be given as "-file:filename".
`-filelinks`	Work on all pages that use a certain image/media file. Argument can also be given as "-filelinks:filename".
`-search`	Work on all pages that are found in a MediaWiki search across all namespaces .
`-logevents`	Work on articles that were on a specified Special:Log. The value may be a comma separated list of these values: logevent,username,start,end or for backward compatibility: logevent,username,total To use the default value, use an empty string. You have options for every type of logs given by the log event parameter which could be one of the following: spamblacklist, titleblacklist, gblblock, renameuser, globalauth, gblrights, gblrename, abusefilter, massmessage, thanks, usermerge, block, protect, rights, delete, upload, move, import, patrol, merge, suppress, tag, managetags, contentmodel, review, stable, timedmediahandler, newusers It uses the default number of pages 10. Beispiele: -logevents:move gives pages from move log (usually redirects) -logevents:delete,,20 gives 20 pages from deletion log -logevents:protect,Usr gives pages from protect by user Usr -logevents:patrol,Usr,20 gives 20 patroled pages by Usr -logevents:upload,,20121231,20100101 gives upload pages in the 2010s, 2011s, and 2012s -logevents:review,,20121231 gives review pages since the beginning till the 31 Dec 2012 -logevents:review,Usr,20121231 gives review pages by user Usr since the beginning till the 31 Dec 2012 In some cases it must be given as `-logevents:"move,Usr,20"`
`-interwiki`	Work on the given page and all equivalent pages in other languages. This can, for example, be used to fight multi-site spamming. Attention: this will cause the bot to modify pages on several wiki sites, this is not well tested, so check your edits!
`-links`	Work on all pages that are linked from a certain page. Argument can also be given as "-links:linkingpagetitle".
`-liverecentchanges`	Work on pages from the live recent changes feed. If used as -liverecentchanges:x, work on x recent changes.
`-imagesused`	Work on all images that contained on a certain page. Can also be given as "-imagesused:linkingpagetitle".
`-newimages`	Work on the most recent new images. If given as -newimages:x, will work on x newest images.
`-newpages`	Work on the most recent new pages. If given as -newpages:x, will work on x newest pages.
`-recentchanges`	Work on the pages with the most recent changes. If given as `-recentchanges:x`, will work on the x most recently changed pages. If given as `-recentchanges:offset,duration` it will work on pages changed from 'offset' minutes with 'duration' minutes of timespan. Beispiele: `-recentchanges:20` - gives the 20 most recently changed pages `-recentchanges:120,70` - will give pages with 120 offset minutes and 70 minutes of timespan `-recentchanges:visualeditor,10` - gives the 10 most recently changed pages marked with 'visualeditor' `-recentchanges:"mobile edit,60,35"` - will retrieve pages marked with 'mobile edit' for the given offset and timespan rctags are supported, and the rctag must be the very first parameter part.
`-unconnectedpages`	Work on the most recent unconnected pages to the Wikibase repository. Given as -unconnectedpages:x, will work on the x most recent unconnected pages.
`-ref`	Work on all pages that link to a certain page. Argument can also be given as "-ref:referredpagetitle".
`-start`	Specifies that the robot should go alphabetically through all pages on the home wiki, starting at the named page. Argument can also be given as "-start:pagetitle". You can also include a namespace. For example, "-start:Template:!" will make the bot work on all pages in the template namespace. Standardwert ist start:!
`-prefixindex`	Work on pages commencing with a common prefix.
`-transcludes`	Work on all pages that use a certain template. Argument can also be given as "-transcludes:Title".
`-unusedfiles`	Work on all description pages of images/media files that are not used anywhere. Argument can be given as "-unusedfiles:n" where n is the maximum number of articles to work on.
`-lonelypages`	Work on all articles that are not linked from any other article. Argument can be given as "-lonelypages:n" where n is the maximum number of articles to work on.
`-unwatched`	Work on all articles that are not watched by anyone. Argument can be given as "-unwatched:n" where n is the maximum number of articles to work on.
`-property:name`	Work on all pages with a given property name from Special:PagesWithProp.
`-usercontribs`	Work on all articles that were edited by a certain user. (Beispiel: -usercontribs:DumZiBoT)
`-weblink`	Work on all articles that contain an external link to a given URL; may be given as "-weblink:url"
`-withoutinterwiki`	Work on all pages that don't have interlanguage links. Argument can be given as "-withoutinterwiki:n" where n is the total to fetch.
`-mysqlquery`	Takes a Mysql query string like "SELECT page_namespace, page_title, FROM page WHERE page_namespace = 0" and works on the resulting pages. See Handbuch:Pywikibot/MySQL .
`-sparql`	Takes a SPARQL SELECT query string including ?item and works on the resulting pages.
`-sparqlendpoint`	Specify SPARQL endpoint URL (optional). (Beispiel: -sparqlendpoint:http://myserver.com/sparql)
`-searchitem`	Takes a search string and works on Wikibase pages that contain it. Argument can be given as "-searchitem:text", where text is the string to look for, or "-searchitem:lang:text", where lang is the language to search items in.
`-random`	Work on random pages returned by Special:Random. Can also be given as "-random:n" where n is the number of pages to be returned.
`-randomredirect`	Work on random redirect pages returned by Special:RandomRedirect. Can also be given as "-randomredirect:n" where n is the number of pages to be returned.
`-google`	Work on all pages that are found in a Google search. You need a Google Web API license key. Note that Google doesn't give out license keys anymore. See google_key in config.py for instructions. Argument can also be given as "-google:searchstring".
`-yahoo`	Work on all pages that are found in a Yahoo search. Depends on python module pYsearch. See yahoo_appid in config.py for instructions.
`-page`	Work on a single page. Argument can also be given as "-page:pagetitle", and supplied multiple times for multiple pages.
`-pageid`	Work on a single pageid. Argument can also be given as "-pageid:pageid1,pageid2,." or "-pageid:'pageid1\|pageid2\|..'" and supplied multiple times for multiple pages.
`-linter`	Work on pages that contains lint errors. Extension Linter must be available on the site. -linter select all categories. -linter:high, -linter:medium or -linter:low select all categories for that prio. Single categories can be selected with commas as in -linter:cat1,cat2,cat3 Adding '/int' identifies Lint ID to start querying from: e.g. -linter:high/10000 -linter:show just shows available categories.

Filteroptionen
Parameter	Beschreibung
`-catfilter`	Filter the page generator to only yield pages in the specified category. See -cat generator for argument format.
`-grep`	A regular expression that needs to match the article otherwise the page won't be returned. Multiple -grep:regexpr can be provided and the page will be returned if content is matched by any of the regexpr provided. Case insensitive regular expressions will be used and dot matches any character, including a newline.
`-grepnot`	Like -grep, but return the page only if the regular expression does not match.
`-intersect`	Work on the intersection of all the provided generators.
`-limit`	When used with any other argument -limit:n specifies a set of pages, work on no more than n pages in total.
`-namespaces` `-namespace` `-ns`	Filter the page generator to only yield pages in the specified namespaces. Separate multiple namespace numbers or names with commas. Beispiele: -ns:0,2,4 -ns:Help,MediaWiki You may use a preleading "not" to exclude the namespace. Beispiele: -ns:not:2,3 -ns:not:Help,File If used with -newpages/-random/-randomredirect/-linter generators, -namespace/-ns must be provided before -newpages/-random/-randomredirect/-linter. If used with -recentchanges generator, efficiency is improved if -namespace is provided before -recentchanges. If used with -start generator, -namespace/-ns shall contain only one value.
`-onlyif`	A claim the page needs to contain, otherwise the item won't be returned. The format is property=value,qualifier=value. Multiple (or none) qualifiers can be passed, separated by commas. Beispiele: `P1=Q2` (property P1 must contain value Q2) `P3=Q4,P5=Q6,P6=Q7` (property P3 with value Q4 and qualifiers: P5 with value Q6 and P6 with value Q7) Value can be page ID, coordinate in format: latitude,longitude[,precision] (all values are in decimal degrees), year, or plain string. The argument can be provided multiple times and the item page will be returned only if all claims are present. Argument can be also given as "`-onlyif:expression`".
`-onlyifnot`	A claim the page must not contain, otherwise the item won't be returned. For usage and examples, see `-onlyif` above.
`-ql`	Filter pages based on page quality. This is only applicable if contentmodel equals 'proofread-page', otherwise has no effects. Valid values are in range 0-4. Multiple values can be comma-separated.
`-subpage`	-subpage:n filters pages to only those that have depth n i.e. a depth of 0 filters out all pages that are subpages, and a depth of 1 filters out all pages that are subpages of subpages.
`-titleregex`	A regular expression that needs to match the article title otherwise the page won't be returned. Multiple -titleregex:regexpr can be provided and the page will be returned if title is matched by any of the regexpr provided. Case insensitive regular expressions will be used and dot matches any character.
`-titleregexnot`	Like `-titleregex`, but return the page only if the regular expression does not match.

Furthermore, the following command line parameters are supported:

Parameter	Beschreibung
`-xml`	Retrieve information from a local XML dump (pages-articles or pages-meta-current, see https://dumps.wikimedia.org). Argument can also be given as "`-xml:filename`"
`-namespace:n`	Number or name of namespace to process. The parameter can be used multiple times. It works in combination with all other parameters, except for the -start parameter. If you e.g. want to iterate over all categories starting at M, use -start:Category:M
`-always`	Don't prompt you for each replacement
`-quiet`	Use this option to get less output

If neither a page title nor a page generator is given, it takes all pages from the default maintenance category.

It is strongly recommended not to run this script over the entire article namespace (using the -start) parameter, as that would consume too much bandwidth. Instead, use the -xml parameter, or use another way to generate a list of affected articles.

Globale Argumente verfügbar

Diese Optionen werden die Konfiguration in den user-config.py -Einstellungen überschreiben.

Globale Optionen
Parameter	Beschreibung	Konfigurationsvariable
`-dir:PATH`	Read the bot's configuration data from directory given by PATH, instead of from the default directory.
`-config:file`	The user config filename. Default is user-config.py.	`user-config.py`
`-lang:xx`	Set the language of the wiki you want to work on, overriding the configuration in user-config.py. xx should be the language code.	`mylang`
`-family:xyz`	Set the family of the wiki you want to work on, e.g. wikipedia, wiktionary, wikitravel, ... This will override the configuration in user-config.py.	`family`
`-user:xyz`	Melde als Benutzer 'xyz' an anstatt des Standardbenutzernamens.	`usernames`
`-daemonize:xyz`	Immediately return control to the terminal and redirect stdout and stderr to file xyz. (only use for bots that require no input from stdin).
`-help`	Zeige den Hilfetext.
`-log`	Enable the log file, using the default filename 'script_name-bot.log' Logs will be stored in the logs subdirectory.	`log`
`-log:xyz`	Enable the log file, using 'xyz' as the filename.	`logfilename`
`-nolog`	Disable the log file (if it is enabled by default).
`-maxlag`	Sets a new maxlag parameter to a number of seconds. Defer bot edits during periods of database server lag. Default is set by config.py	`maxlag`
`-putthrottle:n` `-pt:n` `-put_throttle:n`	Set the minimum time (in seconds) the bot will wait between saving pages.	`put_throttle`
`-debug:item` `-debug`	Enable the log file and include extensive debugging data for component "item" (for all components if the second form is used).	`debug_log`
`-verbose` `-v`	Have the bot provide additional console output that may be useful in debugging.	`verbose_output`
`-cosmeticchanges` `-cc`	Toggles the cosmetic_changes setting made in config.py or user-config.py to its inverse and overrules it. All other settings and restrictions are untouched.	`cosmetic_changes`
`-simulate`	Disables writing to the server. Useful for testing and debugging of new code (if given, doesn't do any real changes, but only shows what would have been changed).	`simulate`
`-<config var>:n`	You may use all given numeric config variables as option and modify it with command line.