Podręcznik:$wgSquidServersNoPurge
 | Ta funkcja została usunięta z jądra MediaWiki w wersji 1.35.0. Proszę zobaczyć alternatywny sposób użycia tej funkcji na $wgCdnServersNoPurge. |
| HTTP proxy (CDN) settings: $wgSquidServersNoPurge | |
|---|---|
Same as $wgSquidServers, except that MW has no methods to send HTTP PURGE to an origin part of the configured ranges |
|
| Wprowadzono w wersji: | 1.4.0 |
| Przestarzałe w wersji: | 1.34.0 (Gerrit change 387877; git #f9f8dff4) |
| Usunięto w wersji: | 1.35.0 (Gerrit change 579755; git #e8d9d68b) |
| Dozwolone wartości: | (IPv4 & IPv6 addresses and/or Classless Inter-Domain Routing (CIDR) blocks) |
| Domyślna wartość: | []Prior to 1.23 CIDR notation was not supported |
| Inne ustawienia: Alfabetycznie | Według funkcji | |
Szczegóły
This variable is about telling MediaWiki an array of CIDR blocks where any IP address part of the range has to be considered as a Proxy server.
Same as $wgSquidServers, except that MW has no methods to send HTTP PURGE to an origin part of the configured ranges.
If you have individual IP addresses, refer to
$wgSquidServersAll documentation in Manual:$wgSquidServers#Configuration example with Varnish is valid, but with difference described below.
// W LocalSettings.php
$wgUseSquid = true;
$wgSquidServersNoPurge = array();
$wgSquidServersNoPurge[] = "192.0.2.0/24";