Handbuch:$wgForeignFileRepos

Geteilte Uploads: $wgForeignFileRepos
An array of repository structure for foreign repositories.
Eingeführt in Version:	1.11.0 (r22580)
Entfernt in Version:	Weiterhin vorhanden
Erlaubte Werte:	(Array)
Standardwert:	(Siehe unten)
Andere Einstellungen: Alphabetisch | Nach Funktion

Details

Warnung:

When using Wikimedia Commons it is required to use HTTPS for links, instead of HTTP. As of 2015, Wikimedia Foundation redirects traffic from HTTP to HTTPS. For security reasons MediaWiki does not follow such redirects (see task T102566). The solution is to use HTTPS in the URLs for Wikimedia Commons! If you use $wgUseInstantCommons , this issue is automatically fixed by using MediaWiki 1.25.2 or newer. If you have defined custom settings with $wgForeignFileRepos for Wikimedia Commons, then the URLs must be adjusted accordingly!

Properties required for all repos

class

The class name for the repository. May come from the core or an extension. The core repository classes are LocalRepo, ForeignDBRepo, FileRepo and ForeignAPIRepo.

name

Ein einzigartiger Name für das Repositorium.

For all core repos

url

Öffentliche URL

thumbUrl

Base thumb url, if different from url/thumb

hashLevels

The number of directory levels for hash-based division of files

thumbScriptUrl

Die URL für thumb.pyp (Optional, nicht empfehlenswert)

transformVia404

Whether to skip media file transformation on parse and rely on a 404 handler instead.

initialCapital

Equivalent to $wgCapitalLinks , determines whether file names implicitly start with a capital letter. The current implementation may give incorrect description page links when the local $wgCapitalLinks and initialCapital are mismatched.

pathDisclosureProtection

May be 'paranoid' to remove all parameters from error messages, 'none' to leave the paths in unchanged, or 'simple' to replace paths with place holders. Default for LocalRepo is 'simple'. Note, some image thumbnailing software puts the thumbnail path into the resulting thumb's metadata, so this setting may not provide full protection.

descBaseUrl

URL für Dateibeschreibungsseiten. Beispiel: https://en.wikipedia.org/wiki/Image:

scriptDirUrl

URL of the MediaWiki installation, equivalent to $wgScriptPath , e.g. https://en.wikipedia.org/w

articleUrl

Äquivalent zu $wgArticlePath , z.B. https://en.wikipedia.org/wiki/$1

fetchDescription

Fetch the text of the remote file description page. Equivalent to $wgFetchCommonsDescriptions .

Warnung:

Due to a bug in MediaWiki, the foreign wiki should have a full, or protocol-relative (but not a generally relative) url in $wgUploadPath , or description pages with images on them won't be fetched properly.

descriptionCacheExpiry

If set to 0, no caching will be used. Set to 1 or more (seconds) to define how long the local cache of description pages will last. Must set fetchDescription to true to use.

ForeignAPIRepo-Klasse

apibase

The base URL for the remote repository's API (e.g. https://commons.wikimedia.org/w/api.php). Nur benutzen für ForeignAPIRepo.

apiThumbCacheExpiry

How long to cache thumbs locally for. Setting this to 0 disables local thumb caching. Local thumb caching will reduce load on the foreign server, and improve user privacy. However it may cause your wiki to be slightly slower.

ForeignDBRepo-Klasse

directory

A path to MediaWiki's media directory local to the server, such as /var/www/wiki/images.

dbType, dbServer, dbUser, dbPassword, dbName, dbFlags

equivalent to the corresponding member of $wgDBservers

tablePrefix

Table prefix, the foreign wiki's $wgDBprefix

hasSharedCache

True if the wiki's shared cache is accessible via the local $wgMemc

favicon

A favicon for the remote repository

Standardwert (Code in includes/SetupDynamicConfig.php):

if ( $wgUseSharedUploads ) {
	if ( $wgSharedUploadDBname ) {
		$wgForeignFileRepos[] = [
			'class' => ForeignDBRepo::class,
			'name' => 'shared',
			'directory' => $wgSharedUploadDirectory,
			'url' => $wgSharedUploadPath,
			'hashLevels' => $wgHashedSharedUploadDirectory ? 2 : 0,
			'thumbScriptUrl' => $wgSharedThumbnailScriptPath,
			'transformVia404' => !$wgGenerateThumbnailOnParse,
			'dbType' => $wgDBtype,
			'dbServer' => $wgDBserver,
			'dbUser' => $wgDBuser,
			'dbPassword' => $wgDBpassword,
			'dbName' => $wgSharedUploadDBname,
			'dbFlags' => ( $wgDebugDumpSql ? DBO_DEBUG : 0 ) | DBO_DEFAULT,
			'tablePrefix' => $wgSharedUploadDBprefix,
			'hasSharedCache' => $wgCacheSharedUploads,
			'descBaseUrl' => $wgRepositoryBaseUrl,
			'fetchDescription' => $wgFetchCommonsDescriptions,
		];
	} else {
		$wgForeignFileRepos[] = [
			'class' => FileRepo::class,
			'name' => 'shared',
			'directory' => $wgSharedUploadDirectory,
			'url' => $wgSharedUploadPath,
			'hashLevels' => $wgHashedSharedUploadDirectory ? 2 : 0,
			'thumbScriptUrl' => $wgSharedThumbnailScriptPath,
			'transformVia404' => !$wgGenerateThumbnailOnParse,
			'descBaseUrl' => $wgRepositoryBaseUrl,
			'fetchDescription' => $wgFetchCommonsDescriptions,
		];
	}
}

ForeignDBViaLBRepo-Klasse

wiki

wiki-db-name used in $wgLBFactoryConf

Directory permissions

You'll need rw on $IP/images and $IP/images/thumbs for whatever user php runs as.

Verwendung

MediaWiki Version:

≥ 1.31

Using files from Wikimedia Commons : ForeignAPIRepo

Since 1.16.0 there is a more convenient shorthand to use Commons as a foreign repository: $wgUseInstantCommons .

You can set your wiki to use media from Wikimedia Commons (or from any other MediaWiki-powered site, see below) directly. However, please beware any legal implications.

To use this, you need:

• MediaWiki 1.13 +
• PHP with JSON support (for the json_decode() function). JSON is enabled by default since PHP 5.2.0, you'll need the PECL extension for older versions. Since MediaWiki 1.16, this is no longer necessary; v. 1.16 will use custom (and slower) code if JSON is not available.
• The remote wiki must also use MediaWiki 1.13 or later; otherwise its api.php returns {"error":{"code":"iiunknown_iiprop","info":"Unrecognised values for parameter 'iiprop'"}} and file requests fail silently (i.e. the requested files are just treated as non-existent).

The code below enables media files from Wikimedia Commons on your site. You should place it in your LocalSettings.php file:

$wgForeignFileRepos[] = [
	'class' => ForeignAPIRepo::class,
	'name' => 'commonswiki', // Must be a distinct name
	'apibase' => 'https://commons.wikimedia.org/w/api.php',
	'hashLevels' => 2,
	'fetchDescription' => true, // Optional
	'descriptionCacheExpiry' => 43200, // 12 hours, optional (values are seconds)
    'apiMetadataExpiry' => 14400, // 4 hours, optional. Consider increasing for better performance.
	'apiThumbCacheExpiry' => 86400, // 24 hours, optional, but required for local thumb caching (Note local thumb caching is often slower than not doing it)
];

If you decide to add this setting to your LocalSettings.php file instead of using $wgUseInstantCommons you cannot use wikimediacommons as a setting for name since it is already present in core MediaWiki code (in Setup.php).

To pull images from another Wikimedia project, set apibase to this wiki's "api.php" file like e.g. https://en.wikipedia.org/w/api.php. Beispiel:

$wgForeignFileRepos[] = [
	'class' => ForeignAPIRepo::class,
	'name' => 'enwikipedia',
	'apibase' => 'https://en.wikipedia.org/w/api.php',
	'hashLevels' => 2,
	'fetchDescription' => true,
	'descriptionCacheExpiry' => 43200,
	'apiThumbCacheExpiry' => 86400,
];

To embed an image in your installation, simply use [[File:name_of_commons_picture.jpg]].

Performance

You may need to configure the $wgMainCacheType as well. Default is often CACHE_NONE, meaning it will load the image from the remote host on each page load which will be very slow. Similarly, you need to set apiThumbCacheExpiry to zero if you prefer to use the foreign thumbnails which will be faster. The default for apiMetadataExpiry is 4 hours. This is one of the most impactful settings for performance. Consider setting to a really high value, such as 604.800 (1 week) for best performance. However this may mean that it can take up to that long for changes to the file to get to your wiki.

Setting $wgResponsiveImages = false; may improve performance of instant commons at the cost of making images be lower quality on high resolution displays.

Currently MediaWiki does not support pipelining foreign api requests. A high performance site may want to look at setting up a local proxy (like nginx) that can coalesce multiple requests into a single pipelined request to reduce round trip times from TCP & TLS handshakes.

There is also an alternative implementation at Erweiterung:QuickInstantCommons which may be much faster

Using files from a database that you can access : ForeignDBRepo, ForeignDBViaLBRepo

The ForeignDBRepo class is very useful for creating wiki families. In a wiki family, each wiki will have its own database or table prefix. Using this class, you can make a family member aware of the tables of another family member. Access through ForeignDBRepo is faster than through ForeignAPIRepo. This code should be deployed to LocalSettings.php.

$wgForeignFileRepos[] = [
	'class' => ForeignDBRepo::class,
	'name' => 'otherwiki',
	'url' => "https://example.org/w/images",
	'directory' => '/path/to/uploads',
	'hashLevels' => 2, // This must be the same for the other family member
	'dbType' => $wgDBtype,
	'dbServer' => $wgDBserver,
	'dbUser' => $wgDBuser,
	'dbPassword' => $wgDBpassword,
	'dbFlags' => DBO_DEFAULT,
	'dbName' => 'mydb',
	'tablePrefix' => 'mw_',
	'hasSharedCache' => false,
	'descBaseUrl' => 'https://example.org/wiki/File:',
	'fetchDescription' => false
];

Alternatively, if you have $wgLBFactoryConf set up for multiple wikis, you can use 'class' => ForeignDBViaLBRepo::class:

$wgForeignFileRepos[] = [
	'class' => ForeignDBViaLBRepo::class,
	'wiki' => 'wiki-db-name-used-with-wgLBFactoryConf',
	'name' => 'otherwiki', # displayname (eg. the vector-skin-tab “View on OtherWiki“) may be set at wiki-specific MediaWiki:Shared-repo-name-<otherwiki>
	'url' => 'https://example.org/w/images',
	'directory' => '/path/to/uploads',
	'hashLevels' => 2, # This must be the same for the other family member
	'tablePrefix' => 'mw_',
	'hasSharedCache' => false,
	'fetchDescription' => true,
	'scriptDirUrl' => 'https://example.org/w', # has effect whether description can be fetched
];

This needs not all the db* parameters as in ForeignDBRepo.

Using files from a local folder : FileRepo

You can set your wiki to use media from a single folder. This is just a demonstration feature at present, and will probably be too slow for busy wikis or slow servers due to the lack of caching. This code should be added to LocalSettings.php.

The below code enabled media files from it:

$wgForeignFileRepos[] = [
	'class' => FileRepo::class,
	'name' => 'sharedFsRepo',
	'directory' => 'media',
	'hashLevels' => 0,
	'url' => 'https://shared.example.org/path/to/media',
];

Caveats

For optimal performance, use a wiki whose primary purpose is to serve as a commons as the target of $wgForeignFileRepos. Avoid, for instance, pointing two content wikis at each other as foreign repositories in order to share files between them, because this will generate an excessive number of file requests on page views and edits as both wikis request the file from each other.

Likewise, avoid sharing a database between the commons wiki and other content wikis, especially if you must use ForeignAPIRepo instead of ForeignDBRepo due to limitations imposed by your service provider or administrator. This generates a large number of potentially long-lived database connections that can result in impaired performance, or can exceed DB connection limits even on wikis with very little traffic or activity.

Siehe auch

• $wgLocalFileRepo
• Manual:Wiki-Familie
• Handbuch:Datei-Uploads konfigurieren (hauptsächlich für lokale Uploads)
• $wgUseInstantCommons (to automatically add commons to the file repository array)

• filerepoinfo API for getting information about the configuration of a repo, e.g.

https://www.mediawiki.org/w/api.php?action=query&format=json&meta=filerepoinfo

• Extension:QuickInstantCommons
• Category:File repository extensions